Advanced reactor developer hits key milestone

Canadian advanced reactor developer Terrestrial Energy continues to make strong progress towards commercialisation of their ‘integral molten salt reactor’ or IMSR.

Having recently closed a CA$10 million (US$7.1 million) round of private investor funding, the company now moves to phase II of development – that of conceptual design in tandem with engagement with the nuclear regulator, the Canadian Nuclear Safety Commission (CNSC).

This latter process, known as the Vendor Design Review pre-licence, is a significant milestone, and was begun in February 2016, a full 3 months ahead of schedule. It is expected to take up to 24 months, at the end of which the company intends to submit a formal licence application to the regulator.

This is also a historic milestone as, as far as is known, it is the first time that a nuclear reactor vendor has ever submitted a Molten Salt Reactor design to a nuclear regulator.

Progress is further evidenced by the announcement that Terrestrial have secured grant funding of CA$5.75 million from the Canadian government under it’s clean tech program STDC (Sustainable Technology Development Canada).

Further announcements on funding from the Canadian and US governments are expected later in the year. These grants are targeted at supporting advanced nuclear innovation, which is encouraging.

Terrestrial has also made progress in the US, having met with the Department of Energy there on a number of occasions, being one of 8 reactor vendors invited to a White House summit dedicated to nuclear development and innovation in December 2015.

The IMSR is a completely new narrative for civilian nuclear power. Using a liquid fuel salt which also doubles as the coolant, the reactor produces a fraction of the waste of a conventional pressurised water reactor (PWR). The reactor cannot explode or melt down and is highly proliferation resistant. The IMSR can be deployed within 10 years and will produce low-carbon energy cheaper than coal,  primarily  due to it’s passive safety profile.

Fuel can be uranium or thorium or indeed spent nuclear fuel including plutonium.

The design permits operation at atmospheric pressure and removes complex elements such as control rods with their associated drive mechanism required in present PWR’s. Passive safety and reactivity control, inherent in the physics of liquid fuel salts, eliminate the need for redundant safety systems and permit on-line removal of fission products.

Operating at higher temperatures than PWR’s also significantly increases the thermodynamic efficiency of the reactor and offers the added possibility of high-value heat.

Molten salt-based reactors are not new technology, having been developed and proven at Oak Ridge National Laboratory in the 1960’s and 1970’s

The IMSR is planned to be available in Small Modular Reactor sizes up to 600 MWt

Terrestrial is one of a number of companies around the world working on commercialising this technology.

Further information www.terrestrialenergy.com

Author: Diarmuid Foley

The author is an energy research engineer specializing in advanced nuclear technology

4 thoughts on “Advanced reactor developer hits key milestone”

  1. Hi Diarmuid ,
    The Canadians are displaying typical CANDU mentality and have stolen a march on the rest of the MSR brigade. Their simplified design and integrated model make it an attractive option for Ireland when we don’t have a strong history in nuclear. It should be ready in time to take over in Moneypoint hopefully if we can get the people behind us. We could even manufacture liquid hydrocarbons using the residual heat. A win win for Ireland.

    1. yes indeed Pat, I believe the IMSR could be much quicker to commecialise than many people anticipated. The US MSR designs are further behind in development and it could be more difficult to license such a reactor in the USA. Let’s see what the response from the engagement with the regulator is next.

    2. Can’t really use “residual heat” unless you don’t mind compromising the generating efficiency of the plant by reducing the temperature drop across the generator.
      Unless of course you’re referring to installing capacity to match peak demand and using the extra capacity available in off-peak hours to synthesize fuels.
      Bear in mind though that electric vehicles would be vastly more efficient to both charge and run than synthesizing fuel and operating ICE’s or even fuel cells,.. ..however it remains to be seen whether the costs of Generation-4 nuclear are so low that it’s worthwhile trading the greater efficiency of and higher hardware costs of battery electric for the lower efficiency but also lower hardware costs of a synthetic fuel economy.

      1. Hi Andy , You may well be right . I am not an engineer but am very interested in these issues . I was thinking of Robert Hargrave’s book “Thorium , Energy Cheaper than Coal” . In it he makes the case for the manufacture of hydrocarbons for those areas such as aviation and heavy transport that will probably require liquid fuels for some time yet . He does spend some time on the economics of all this as the title suggests .

Leave a Reply to Andy G Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.